SA 1.41 B | Certilas: The filler metal specialist

Go Back

productspecificaties
Verpakkingen
vraag offerte

Type

Medium alloyed seamless basic flux cored wire for SAW

Extreme crack resistant weld metal due to the high basic slag in combination with a remarkable low hydrogen content. The requirements of the steels mentioned are obtained in normalized (N) and in air quenched (A) condition . SA 1.41 B is not recommended in the stress relieved condition.

Not required

Toepassingen

Crane, apparatus, pressure vessels, foundries, casting etc.

Type

Medium alloyed seamless basic flux cored wire for SAW

Toepassingen

Crane, apparatus, pressure vessels, foundries, casting etc.

Eigenschappen

Extreme crack resistant weld metal due to the high basic slag in combination with a remarkable low hydrogen content. The requirements of the steels mentioned are obtained in normalized (N) and in air quenched (A) condition . SA 1.41 B is not recommended in the stress relieved condition.

Geschikt voor

Base metal	DIN	EN	ASTM
Fine grain steel N+A -	WStE 315 till 420 StE 315 till StE 420 EStE 315 till EStE 420	S315*NL1/2) - S420(NL1/2) - -	A 516 / A 255 A 333 / A 350 A 612 / A 707

Lasposities

Herdrogen

Not required

productblad

prestatieverklaring

conformiteitsverklaring

productblad

Medium alloyed seamless basic flux cored wire for SAW

Disclaimer

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.