SP 1.8401 | Certilas: The filler metal specialist

Retour

spécifications du produit
conditionnement
demander un devis

Type

Copper coated solid thermal spray wire for coatings with high hardness.

Medium hard, wear resistant alloy with excelent lubricating and sliding properties with high bonding strength.
Is an 1.8401 wire type specially modified for spraying.

Not required

classification

EN ISO

14919: X.mod type

Applications

Machine parts, storage surfaces, shafts, cylinder surfaces etc..

Type

Copper coated solid thermal spray wire for coatings with high hardness.

Applications

Machine parts, storage surfaces, shafts, cylinder surfaces etc..

Propriétés

Medium hard, wear resistant alloy with excelent lubricating and sliding properties with high bonding strength.
Is an 1.8401 wire type specially modified for spraying.

Classification

EN ISO

14919: X.mod type

Convient pour

Flame spray, electric spray and high speed flame spray.

Positions de soudage

Etuvage

Not required

Gas acc. EN ISO 14175

M21

Analyse

C	Si	Mn	P	S	Cr	Ni	Mo	Nb	Ti	Fe	W	B	Cu	Zn	Pb	Sn	Al	Mg	As
0.35	0.3	0.6	0.01	0.01	1.7	0.95	0.2										0.9

Propriétés mécaniques

Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
Heat Treatment	R_P0,2 (MPa)	Rm (MPa)	A5 (%)	Hardness
As Welded				300 HB

fiche produit

déclaration de performance

déclaration de conformité

fiche produit

demander un devis

Copper coated solid thermal spray wire for coatings with high hardness SP 1 8401

Avertissement

Whilst all reasonable efforts have been made to ensure the accuracy of the information contained, the information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and any liability incurred from any reliance thereon is expressively disclaimed. Typical data are those obtained when welded and tested in accordance to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Other tests and procedures may produce different results. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application. The selection and use of specific products is solely within the control of, and remains the sole responsibility of the customer. The right to change design and/or specifications without notice is reserved.